Mechanically Assisted compactus® are compactus® where mobiles are rolled
along the unit by rotating mechanically driven handles which pull the
units along the tracks. These compactus® units also generally have a fixed
end which all the bays roll up to allowing the unit to be closed and
locked.
Mechanically Assisted
compactus® are generally larger compactus® Units.
Shelving Bays are usually 900mm wide, however unlike hand operated
compactus® they are available from two bays
deep up to 7 bays deep (6300). These compactus® are available in almost any
size, as small as a 12 bay units, and can be as large as 50 bays or
bigger.
Mechanically Assisted
compactus® are quite often Floor mounted. These compactus® are used in office’s for large
filing requirements or in industrial areas. Because of there size, these
compactus® roll on Steel tracks which are attached to the floor and
levelled to within 1mm and packed with a non shrink grout to maintain the
level. Floor drilling and carpet cutting is required.
Mechanically Assisted
compactus® can be
made to fit any room or storage area. While shelves are generally 900
wide, they can be 300, 400, or 450 deep. These compactus® are able to
be made almost any height.
